Comments for ToolGuyd

Comment on Dremel Multi-Max MM40 Multi-Tool – More Muscle & Tool-Free Accessory Changes by Mark

Mark — Fri, 25 May 2012 06:54:05 +0000

Thank’s Tom… I’m guessing you work for Dremel…

Comment on Dewalt 20V Bare-Tools Finally Available by mnoswad1

mnoswad1 — Fri, 25 May 2012 03:54:39 +0000

I didn’t realize that they were made in China now…….kinda funny that I prefer my tools be made in mexico…..the rationalization being that it’s at least closer to the US and our people can go down there and check the quality in person more often.

We cant be a nation of just service professionals and consumers.

Comment on Never Shop at Harbor Freight Without a Coupon by Robert Wdowiak

Robert Wdowiak — Thu, 24 May 2012 19:39:56 +0000

I have a HF stubby 1/2 inch ratchet ( similar to Gearwrench Roto Ratchet) that has very beefy metal, great fit and finish, and a super comfortable handle. It’s marked CR-V and is made in Taiwan (Taiwan makes some good tools). My HF caliper set works great (automobile brake piston retraction). Got to go tool by tool at HF, but this is a must when buying tools anywhere.

Comment on New Gearwrench 84-Tooth Ratchets by Reed Felton

Reed Felton — Thu, 24 May 2012 19:11:43 +0000

Hi Jim,
Glad to see the major tool companies are tuned in to these forums. Did you look at this 3 minute YouTube video? http://www.youtube.com/watch?v=hyGzrGofJyQ
Full disclosure here, I am the designer of the patent pending technology in the video and have submitted it to Apex through the invention portal. There are 2 wrench demos, an OERW and a boxend wrench. The boxend shows how the GearWrench compares to the new technology I am offering. Am I guilty of shameless promotion? Yes. Will it be worth your time to look at? Yes. I would welcome your assessment. Thanks!

Comment on Buy a Cordless Drill Now or Wait for Brushless? by Seti

Seti — Thu, 24 May 2012 18:50:34 +0000

They nailed the ergonomics but the new dewalts feel like plastic toys IMO.

Every time I adjust the clutch, or change directions, I feel the cut corners.

Comment on New Gearwrench 84-Tooth Ratchets by Jim Stewart

Jim Stewart — Thu, 24 May 2012 18:49:07 +0000

This is Jim Stewart, brand manager for GearWrench. Thanks everyone for your feedback. The benefit of the GearWrench 84 Tooth Ratchet is that it greatly improves access. As for availability, we are converting all 60 Tooth Ratchets to the new 84 Tooth Ratchet. It’s happening in phases so you won’t see the new ratchet in all locations at one time. Please join us on our Facebook page (Facebook.com/gearwrench) to get the latest news on GearWrench.

Comment on Dewalt 20V Bare-Tools Finally Available by StoopidMonkey81

StoopidMonkey81 — Thu, 24 May 2012 14:16:52 +0000

I can’t wait to get my hands on the new 20V Max stuff (especially the brushless impact driver), even if my heart broke when I saw almost all of this line is now made in China, except for the hammerdrill which is still made in Mexico (which is the best you can hope for in cordless tools these days it seems).

Comment on New Gearwrench 84-Tooth Ratchets by GEOD998

GEOD998 — Thu, 24 May 2012 12:36:42 +0000

I my experience ya just cant use these fine toothed ratchets for everyday jobs without the “tap-tap” syndrome setting in.I don’t see that changing with this 84T generation.But,in a tight spot these are priceless. I still cant believe how well my original gear wrenches have held up.I bought the regular gearwrench set, a gear ratchet set,and a NAPA flex head gearwrench set all on sale very cheap.I figured they were cheap and came in a small quiet case-great to throw in the trunk-”just incase” . Never expected to actually use them for semi-hard core wrenching(I own a heavy equipment and trucking biz) . Now, its been more years than I want to think about…and they’re still in my top center drawer. Truly a pleasant surprise. I don’t know about you folks,but,that sure doesn’t happen for me very often these days. Sure hope the hits keep on comin from gearwrench.

Comment on New Gearwrench 84-Tooth Ratchets by Allen

Allen — Thu, 24 May 2012 12:00:17 +0000

Interesting, good luck with your product. Made in USA ?

Comment on Buy a Cordless Drill Now or Wait for Brushless? by Stan

Stan — Thu, 24 May 2012 04:28:52 +0000

I think the Makita tools stand out right now with their battery platform and brushless line up. The Lithium tools are outstanding and there is no lack of tools to be had in the huge line they have. The brushless impact is on it’s second version. I have the first Makita brushless impact and it has power, light weight, and comfort.

Brushless will be fun to watch, but if you need tools I think you can’t go wrong with lithium. There is always something new and more impressive on the horizon.

Comment on New Gearwrench 84-Tooth Ratchets by Reed Felton

Reed Felton — Thu, 24 May 2012 03:14:51 +0000

Beware of GearWrench ratchet arc claims. These are nominal ratchet arc claims not actual ratchet arc achieved. On their 72 tooth boxend wrenches they claim “as little as 5 degree ratcheting arc” In real world testing this nets out at about 12 degrees. Add the slop from the interface between the wrench and the nut and you are in the vicinity of 16 degrees. They are nice wrenches but have excessive backlash between the gear and the pawl. To see a head to head comparison between Gearwrench and some new ratchet technology see this YouTube video http://www.youtube.com/watch?v=hyGzrGofJyQ

Comment on Amplifi – Garden Hose Powering System by Robin

Robin — Wed, 23 May 2012 23:26:02 +0000

It’s actually possible to put a booster system on your water supply, but its not your average DIY type of thing. It’s somewhat complex, expensive, and requires professional-level work to accomplish.

The last time I saw it done, was on a property where the house was on a steep slope, and the well drilling rig was only able to drill the well about 50ft downhill from the house. They had to install a booster pump after the main well pump, to get the water up the hill to the house.

Comment on Buy a Cordless Drill Now or Wait for Brushless? by Robin

Robin — Wed, 23 May 2012 23:20:13 +0000

I would personally buy into the 20V max lineup… IMO the 20V max compact drill is the best on the market, brushless or not, due to its ergonomics and power.

Dewalt already offers a brushless impact for the line, and has hinted that they intend to expand their brushless lineup.

Also, since it is their new flagship platform, the batteries and tools will be around for a long time, and are a VERY safe bet to invest in.

Comment on Ryobi Tek4 Tools and Gadgets, What to Make of Them? by Rascally

Rascally — Wed, 23 May 2012 23:16:18 +0000

I have 3 of the TEK4 tools. I have the driver, studfinder, and the flashlight. I started with the screwdriver. The price at the time was $29.95, for the driver, battery, charger, and fabric case. I think the price is $39.95 now.

The driver is perfect for inside the house, when you’re doing small projects and don’t need the bulky weight of a normal sized driver. It has a 24 position clutch, but the motor will stall before you get to the higher settings. It’s almost like they took the clutch torque specs from the 18V model, and passed it on to this model. Overall, I’m pleased with the unit, and it fits a niche market with the smaller size.

The Stud Finder works good, and you get another battery and charger. The Finder also lets you know when there’s an electrical circuit in the area you’re scanning.

The Flashlight is extremely bright, and well made.

Like other people have commented here, I wouldn’t be interested in the camera or the MP3 player, as I have those items in other brands,

Comment on Everyday Joe Woodworking Injuries by Dan Richards

Dan Richards — Wed, 23 May 2012 18:25:28 +0000

I was in PT for a hand injury in 2005 with a guy who cut his left hand in half with his tablesaw. Twice. He’d cut the digits a number of years before and was back for a more time consuming palm and thumb reconstruction and PT. His wife was really, really mad, all the time.