There are quite a few questions about the new Craftsman 21226 MiterMate miter saw that we set out to address with a full no-holds barred hands-on review. Is the MiterMate gimmicky? Overly complex? Awkward and clumsy? Or is it as innovative and functional as Craftsman advertises? Keep reading for our full review of the MiterMate, or […]
Quick Review of Superior Tool ST-2000 Pipe Cutter
I needed to make two cuts in a length of 1″ Schedule 40 galvanized steel pipe, and did not have the tools available to do so. There are many hand and power tools that would have been appropriate for a job like this: an angle grinder, chop saw, metal cutting circular saw, snap pipe cutters, rotary pipe […]
Milwaukee M12 Right Angle Drill Hands-on Review
Here’s our original review of Milwaukee’s M12 cordless right angle drill/driver.
C.H. Hanson Precision Ball Level Review
Two months ago to the date, we shared with you our very positive first impressions of C.H. Hanson’s Precision Ball Level. Since then, we have used the level quite a bit for various projects and tasks, and not only has it not disappointed us yet, it has exceeded our most demanding expectations. Following is our […]
Gearwrench Double-X Hemostat Review
Today we’re taking a quick look at the relatively new Gearwrench Double-X hemostat. Similar in design to Gearwrench’s Double-X pliers, these hemostats are designed to hold and clamp onto objects in hard to reach areas. Hemostats are clamping forceps that (in a non-medical sense) are preferred over pliers when dealing with small or delicate parts or when working in tighter […]
Campbell Hausfeld Finish Nailer First Impressions
As we previously mentioned, Campbell Hausfeld recently released a new line of pneumatic nailers. We now have our hands on CH’s new CHN706 angled finisher nailer, and are in the process of giving it a very rigorous review. In the meantime, take a look at our [very positive] first impressions of the nailer. Setup: The nailer […]
CH Hanson Precision Ball Level First Impression
About three months ago, we posted about CH Hanson’s new Precision Ball Levels. We now have one of these new 24″ levels in our possession, and thought you would appreciate a few first impressions until we can offer a full review. We handed the level to a few colleagues, and following are their initial reactions. Holy [expletives]. […]
PB Swiss Tools Insider Bit Driver Review
The PB Swiss Tools Insider driver is a pocket-friendly screwdriver that can carry up to 8 insert bits in a removable cartridge. Don’t let its modest size or appearance fool you – the high quality Insider is very well designed and can handle most manual driving tasks with ease. Take a look at our in-depth review of the […]
Gearwrench Magnetic Extension Review
If you find that you often need to use tape, putty, or shims to hold fasteners inside of sockets, then you will definitely want to consider Gearwrench’s new magnetic drive accessories. Gearwrench’s new magnetic lineup includes 6″ extensions, universal-joint adapters, and drive-size adapters, all available in 1/4″, 3/8″, and 1/2″ drive. In this review, we put Gearwrench’s 6″ magnetic extensions to the test – read on for a detailed […]
Stanley Powerlock Tape Measure Review
It can be quite tough to find a good tape measure these days – unless you have access to a Stanley Powerlock, that is. Powerlocks have a classic no-frills look and feel which make them easily recognized amongst hobbyists and pros alike. Although tape measures are extremely ubiquitous, they’re not all built the same. In fact, there are […]
Megapro Driver Review
Megapro’s wide range of multi-bit screwdrivers, bits, and accessories, are sure to meet most of your portable driving needs. Currently, there are 7 drivers with different bit assortments based on bit type or common usage – hex, tamperproof, and automotive to name a few. Each screwdriver comes with 7 double-sided bits and a 1/4″ hex driver, but you can also […]
- « Previous Page
- 1
- …
- 33
- 34
- 35