Dewalt has launched new 20V Max cordless grinders that they say were built to change the way you work.
There are four new Dewalt Atomic 20V Max grinders, all with brushless motors: 4″ angle grinder, 4-1/2″ angle grinder, die grinder, and right angle die grinder
Dewalt says “stop being limited by cords and air hoses,” and that their new Atomic series cordless grinders feature a compact size and more power than pneumatic grinders.
Advertisement
The brand says that these are “a major industry breakthrough,” and that they “are changing the game with innovative cordless control and consistency.”
Here’s what’s launching soon:
Dewalt DCG400 4″ Angle Grinder
Dewalt says that the new 4-inch angle grinder delivers up to 44% more power compared to 0.7 HP air angle grinders.
Dewalt DCG402 4-1/2″ Angle Grinder
Dewalt says that the new 20V Max Atomic 4-1/2″ cordless angle grinder is 29% smaller than their non-XR brushless angle grinder, model DCG408, which launched earlier this year.
Dewalt DCG420 Die Grinder
Dewalt says their new Atomic cordless impact driver is 45% smaller than Milwaukee’s M18 die grinder.
If you look at the fine print, Dewalt says that their new DCG420 die grinder is 45% smaller than the Milwaukee 2784-20 die grinder.
Advertisement
The 2784 launched nearly 9 years ago – see New Milwaukee M18 Fuel Brushless Die Grinder.
Milwaukee replaced that model 3 years ago – see New Milwaukee M18 Fuel Gen-2 Cordless Die Grinders.
Dewalt also says that their new Atomic 20V Max die grinder delivers up to 2X the power compared to Milwaukee’s M12 Fuel model (see New Milwaukee M12 Fuel Straight Die Grinder).
Dewalt DCG422 Right Angle Die Grinder
Dewalt says that their new DCG422 delivers up to 53% more power compared to the Milwaukee M12 3485-20.
The 3485 is the latest M12 Fuel right angle die grinder, which launched this year – see Milwaukee M12 Fuel Right Angle Die Grinder got an Upgrade.
Common features across all of the models include:
- Dewalt Perform & Protect anti-rotation
- Electronic brake
- Variable speed trigger switches
- Fast guard and wheel changes (DCG400, DCG422 only)
- Air tool-like paddle switch
- Forward exhaust system
- LED light (DCG420, DCG422 only)
- Tool Connect Chip Ready
Pricing and availability details are not yet available for any of the new tools.
Jared
Excellent. Those seems like very handy additions to the lineup to me. They’re obviously an alternative to a 12v tools.
I bought the Bosch 12v right angle die grinder because Dewalt didn’t have one. I probably would have chosen this one if it existed at the time – and now that I’m working on replacing my cordless tools after my garage fire… I imagine I will.
Doresoom
I found SB&D’s patent for this type of motor earlier this year: https://patents.google.com/patent/US20250219493A1/en
They’ve been developing it for quite a while – their first related filings were back in 2022!
EBT
About the DCG422, I wish Dewalt would fix their load times (cache hardware, Dewalt hosting!) of their product site, and that there is no information on the weight. Used a neighbor’s M12 rightangle die grinder with the smaller battery and it was a no-brainer to use. But with the larger battery, you fatigue before the battery runs out. So, I don’t care about the 53% more run time than the competition…I care about specs and missing is weight w/o battery and with (XR 20V 3.5Ah).
(Dewalt lists the B version which is the non-kit version – B for Bare tool)
NoDak Farming
I’m really liking the form factor and compactness of these tools. Especially that die grinder. I hope every single other cordless tool manufacturer see’s these, and notices what Dewalt has done. And then I hope those companies try to compete with these tools. (Not over night obviously. But eventually)
MM
Nice to see these hitting the market finally. I am very interested in the DCG422.
fred
“Dewalt says that the new 4-inch angle grinder delivers up to 44% more power compared to 0.7 HP air angle grinders.”
That sounds impressive – but then I looked at the specs for the Cleco 4.5-inch angle grinder we used – and Cleco claims 1.7HP – not 0.7HP. There are many pneumatic angle grinders in the 0.7 to 0.8HP class – so the comparison is still valid – just not compared to a heavy-duty air grinder. The price is certainly attractive compared to a Cleco – and I can certainly see the Dewalt getting used for field work and smaller shop jobs where full-production mode of an air grinder is not needed.
fred
Since price is not yet announced – I should have said that the price is likely to be attractive compared to a $1200 Cleco
Matt_T
Pretty sure these are targeted towards mechanics so I’d say the 0.7HP comparison is fair.
For shop use Dewalt have several corded brushless grinders. They’d be way cheaper to run than industrial air grinders, and probably quieter too. Unlikely they’d last as long as air though….
MM
Agreed the power is not super impressive. The larger air tools can easily beat it, and so do industrial tier flex-shaft tools: a Suhner Rotar is over 4hp. But for small jobs these would be great. I think a lot of people are going to set up that 90 degree die grinder with a 3″ Roloc arbor as a general purpose gunk remover. That would be great to prep & finish small welds, clean gasket surfaces, strip old finish, etc. The old M12 was barely adequate for a 2″ Roloc in my opinion but this should have plenty of grunt for a 3″.
fred
Seems like it was many decades ago when I wanted to buy a flex shaft machine to replace my Dremel 280. I asked our toolroom guy and he recommended a Suhner machine. That was before the Internet – so I had no idea what class of machine it was but thought (based on the recommendation) that it would beat out a $35 Dremel. Then I learned that the machine he was recommending would indeed beat out a Dremel, required rewiring my home shop for 3-Phase power, cost as much as a used car – and that a Foredom machine was really what I wanted.
Saulac
TIL about 4” vs 4 1/2 “ grinders. Do people actually care? Can you fit the larger disc into the smaller grinder?
Bonnie
Arbor sizes are typcially different between the two sizes. I’m sure you could find some that fit as long as they’re rated for the correct rpm… But I would definitely stick with the manufacturer recommendation here, grinding discs are dangerous enough already with risking mismatches and removing the shroud.
Stuart
Only use accessories as specified by manufacturers and explicitly permitted in the user manuals. Some models are compatible with different sizes of accessories but you MUST use the appropriate guard. Sometimes they’re included, often they’re available separately.
JoeM
These actually look spectacular! I only wish they weren’t in the Atomic class. This is my usual rant about having big hands, and that the Atomic class grip leaves my pinky off the grip. The two Die Grinders would have been absolutely beautiful Rotary Tools if they were 8V Max, high speed, low torque jobs. Those designs are ideal from a rotary tool user, like myself. The compactness of two angle grinders like these seems very appropriate for the field. Overall I like these four tools. I doubt I’ll be buying them, but they are certainly something I like seeing DeWALT do. Genuine change in their lineup.
Matt
As someone who is in M12 and DeWalt 20V and uses for grinders quite a bit, this is an interesting development. They seemed to go for the higher power/runtime angle, but as someone else pointed out, I’ll be curious about the balance and fatigue of the tool. I use a right angle die grinder a lot because of the light weight and size. Milwaukee’s M12 fits a great balance of power and size. Given the battery form factor I don’t see a better option for DeWalt, but these seem definitively less ergonomic for longer periods. I like the idea of more companies bringing cordless die grinders to market, I really like them for lighter material removal and weld prep. They are also great for automotive parts cleaning. I have a cordless angle grinder that I get out a few times a year since the die grinder generally is a better tool for my needs. Don’t think I will buy these, but nice to have more options