ToolGuyd

The Latest Tool Reviews, New Tool Previews, Best Tool Picks & Deals Blog

  • New Tools
  • Reviews
  • Guides
    • Best Cordless Power Tool Brand
    • Best Cordless Drills (New for 2016!)
    • Best Multi-Bit Screwdrivers
    • Best $100 Cordless Drills
    • Best Cordless Impact Drivers (2015)
    • Best Cordless Circular Saws
    • Best Tape Measure
    • Cordless Drill Comparison Guide
    • Best Cordless Oscillating Tools
    • Best EDC Gear
    • Best Multimeter
    • Best Precision Screwdrivers
    • Best Random Orbital Sanders
    • Best Modular Tool Boxes
    • Ultimate Tool Gift Guide
  • Hand Tools
    • Bit Holders & Drivers
    • EDC, Pocket, & Multitools
    • Electrical Tools
    • Flashlights & Worklights
    • Knives
    • Mechanics’ Tools
    • Pliers
    • Screwdrivers
    • Sockets & Drive Tools
    • Wrenches
    • All Hand Tools
  • Power Tools
    • Accessories
    • Cordless
    • Drills & Drivers
    • Oscillating Tools
    • Saws
    • All Power Tools
  • Brands
    • Bosch
    • Craftsman
    • Dewalt
    • Kobalt
    • Makita
    • Milwaukee
    • Milwaukee NPS18 Previews
    • All Brands
  • USA-Made
  • Deals
ToolGuyd > Hand Tools > EDC, Pocket, & Multitools > Gearwrench Gimbal Palm Ratchets

Gearwrench Gimbal Palm Ratchets

Oct 28, 2013 Stuart 22 Comments

If you buy something through our links, ToolGuyd might earn an affiliate commission.

Gearwrench Gimbal Ratchet Small Gearwrench Gimbal Ratchet Large

These new Gearwrench Gimbal Ratchets are available in 1/4″ (blue) and 3/8″ (red) sizes. The ratchets appear to be the same size, except for the square drive ends.

These remind me of a palm ratchet that Gearwrench used to make for Kobalt, but with much beefier build quality. They’re more closely akin to Gearwrench’s Roto Ratchet and Wera’s Zyklop ratchet, but with an additional degree of freedom and limited range of motion.

Advertisement

Each ratchet features 72-tooth gearing for a 5° swing arc, an anodized aluminum finish, and milled finger-friendly grooves.

As with other palm-style ratchets, these new gimbal ratchets are designed for low-torque applications.

Catalog numbers: 81027 (1/4″), 81270 (3/8″)

Look for these new ratchets starting in November 2013 via select Gearwrench dealers. At least one dealer is currently listed these ratchets as KD Tools products. Both sizes appear to be priced at about $16-21 each.

Buy Now(via Amazon)
More Info: 1/4″, 3/8″, via Gearwrench

Personally, I wish that there was a third gimbal ratchet – one sized to fit 1/4″ hex screwdriver bits, but I suppose either of these can be fitted with a screwdriver bit socket adapter quickly and easily enough.

Related posts:

Husky 60pc Universal Mechanics Tool SetHusky 60pc Universal Mechanics Tool Set with 100-Position Ratchets and Universal Sockets Craftsman 81pc Mechanics Tool SetFirst New Craftsman Ratchets and Tool Sets Appear on Lowes.com Kobalt Pro90 Ratchet ConstructionKobalt Pro90 Ratchets New Dewalt Ratchets 2018New Dewalt Ratchets are Hitting the Market

Sections: EDC, Pocket, & Multitools, Mechanics' Tools, New Tools, Sockets & Drive Tools Tags: RatchetsMore from: Gearwrench

« New Makita Heated Jackets
Deal: Dewalt 35pc Impact Bit Set »

22 Comments

  1. Soda says

    Oct 28, 2013 at 1:24 pm

    Even though I don’t own any Gearwrench tools because they are not made in the USA, I have always been impressed with their quality. If USA made tools didn’t exist, I would definitely be a fan of Gearwrench.

    Reply
    • LORDDiESEL says

      Oct 28, 2013 at 9:21 pm

      Don’t let the coo stop you. The 120xp’s flex heads are some of the best rats out there.

      Reply
      • Stan says

        Oct 29, 2013 at 2:09 am

        When this comes to certain tools, I rather the product be American made. I only only American made ratchets, wrenches and sockets.

        Not that there is anything wrong with the imports, but that’s just it though.

        Reply
        • LORDDiESEL says

          Oct 30, 2013 at 11:20 pm

          What about ratchet wrenches? I didn’t think there was a domestic maker of these?

          Reply
          • Stuart says

            Oct 30, 2013 at 11:35 pm

            You mean like these?

          • LORDDiESEL says

            Nov 3, 2013 at 3:07 pm

            Stu. Those are bad ass! Proto must be the only domestic source for ratchet wrenches.

          • Stuart says

            Nov 3, 2013 at 3:14 pm

            I believe Armstrong’s are also still USA-made. Possibly Snap-on’s as well, but I haven’t checked.

        • David says

          Apr 23, 2014 at 10:07 am

          SODA, I’m with you, if it isn’t made in America, it’s not for me. It’s not because it’s not good but I support American workers. I’m retired from Ford after 38 yrs. & I know not everything is made in U.S.A. but I do my homework & buy a Ford that’s 90% made in the U.S. Yes, they’re Ford’s that are almost totally made in the U.S. Good comment SODA!

          Reply
  2. mike says

    Oct 28, 2013 at 1:42 pm

    Interesting. I like Gearwrench and own plenty of their wrenches and ratchets. Not really sure where id find a use for these,but wouldnt mind having a pair just for show. And your idea for one that uses 1/4 hex bits is a great idea and one id definately like to own.

    Reply
  3. Harry says

    Oct 28, 2013 at 2:05 pm

    good idea on the hex bit gimbal ratchet version!!
    Gearwrench continues to grow and offer more tools.

    I’m still waiting for you to post Beta Tools Holiday flyer though to make up for all of those Kobalt items you talked about.

    Reply
  4. LORDDiESEL says

    Oct 28, 2013 at 9:19 pm

    I’ll be buying both 1/4 and 3/8’s.

    Those will save my ass big time.

    Reply
    • matt says

      Oct 29, 2013 at 3:25 am

      Same these look awesome..

      I have a couple old style thumb drive ratchets kinda like this and they are real nice..

      Reply
  5. Jim says

    Oct 29, 2013 at 2:09 am

    Interesting, but I trying to imagine in what situation I would ever practically use this. I have use a wobble extension and a universal joint, but in situations where I cannot get my hand, wrench or ratchet close to (limited access). If I have enough room to have my hand on a Gimbal Palm Ratchet, wouldn’t a have enough room to just angle a fixed head palm ratchet (like the Williams Palmster)? This would also provide a straight shot onto the fastener. Again, if I really needed an angled approach and could get my hand in their, I would then just go back to my universal or wobble extension.

    Reply
  6. jesse says

    Oct 29, 2013 at 6:32 pm

    Red and blue were not the best color choices, given that red is often used now to label SAE/inch tools, and blue for metric tools, but I guess there is no real confusion here.

    Reply
  7. Bill Strobel says

    Oct 30, 2013 at 4:44 pm

    What ever happened to the Gear Wrench open end ratcheting wrenches they showed 2 years ago at SEMA? When they showed them they were going to be released soon then nothing.

    Reply
    • Harry says

      Oct 30, 2013 at 9:35 pm

      What are you talking about? The ratcheting open end combination wrenches have beeen on the market for awhile now. It’s been soo long, Craftsman even has a version. Gearwrench also has ratcheting flex flare nut wrenches, and ratcheting flare crowfeet out too.

      Reply
      • Stuart says

        Oct 30, 2013 at 9:46 pm

        I think he’s talking about the ratcheting flare nut wrenches. These are out now, although not at all distributors, and were very slow to be released after their announcement in ~May 2012.

        Reply
  8. Brian14 says

    Nov 8, 2013 at 10:14 pm

    Interesting idea. I’d consider getting one as a gift for someone.

    Reply
  9. SteveR says

    Dec 9, 2013 at 12:04 pm

    Jim–There could still be instances where you would use a universal joint or a wobble extension to get the socket to the bolt, but still not have enough room to turn it fully (as in a tight engine compartment). In those cases, a gimbal ratchet (or even the cheapie finger ratchets from Harbor Freight) would get the job done. Just keep in mind that these types of ratchets can help you turn the bolt down or remove it after initial loosening, but should not be relied upon for final tightening. For that you’ll need a regular ratchet with a long extension and the proper socket (or possibly a flare nut wrench head).

    Reply
    • SteveR says

      Oct 24, 2014 at 1:29 pm

      As a follow-up to last year’s comments, I am torn about this ratchet as I look at it again. It appears to be all metal, which I like, but the metal “ring” that you grip is relatively smooth (reducing your grip), and the finger indents are not prominent (i.e., deep), which also reduces gripping capability. I’ve not seen one up close, so I don’t know how well they work, or if the grip issue is a problem; however, it’s something to consider. The Harbor Freight, Titan, et al, versions (which don’t have the gimbal capability but have plastic bodies), are viable alternatives at a much lower price point (from about $3.00-$7.00, depending on where you buy them).

      I’m not giving you a homework assignment (I know you’re extremely busy as it is), but a “throwdown” competition between the two types might be interesting. You could give your verdict, and readers could comment on their experience with one or both styles. For starters, either style is basically used for run-down or run-up work (i.e., not for final tightening or initial loosening), so grip may not be an issue for many users.

      As for your concern about a third ratchet that would handle hex screwdriver bits (1-inch length), I purchased a PowerBuilt stubby ratchet on Amazon that is two-sided; it handles both 1/4-inch drive sockets and, when you flip it over, 1/4″ hex bits. I believe it has a 72-tooth gear mechanism and gets into some tight areas, so it might be what you’re looking for. It’s lightly knurled at two points on its handle, which gives a good grip without digging into your fingers or palm. It’s built really well (mine has no slop in the ratcheting mechanism), and has a high-polish chrome finish; the overall length is 3-1/4″. I’ve forgotten the price, but it should still be available through Amazon and at the big chain auto parts stores.

      Reply
  10. SteveR says

    Oct 24, 2014 at 2:00 pm

    As a follow-up to my follow-up, this is a PowerBuilt 940478 ratchet, and it sells for $10.59 on Amazon. PowerBuilt is part of AllTrade Tools.

    Reply

Trackbacks

  1. 3/8" Drive Gimbal Ratchet - Page 14 says:
    Aug 1, 2015 at 3:07 pm

    […] I guess these have been out a while. Looking back to 2013, they got the same comments then as we did now. Gearwrench Gimbal Palm Ratchets […]

    Reply

Leave a Reply to mike Cancel reply

Your email address will not be published. Required fields are marked *

  • Email
  • Facebook
  • Instagram
  • Twitter
  • YouTube
ToolGuyd Forum

Join our Newsletter

Sign up to receive the latest tool news.

Your info won't be shared. Unsubscribe anytime.

Recent Comments

  • Garrick on Fein Tools Math Riddle: “Assuming that Fein wants a numerical answer, I got 17 until I read that there was a Multiplier, then I…”
  • B-Rad on Reader Question and Humorous Goof: Who Controls Product Descriptions?: “This is a great idea! Did you just cut off the head that came on it, and the SKS head…”
  • Chip on Fein Tools Math Riddle: “I don't have time to read the whole thread . I used a value of 5 for the battery…”
  • Chip on New Irwin Vise-Grip Pliers Wrenches are Now Available: “Most of the under 7in Knipex PW are under $30 at KC tool,and Zorro when you consider the 20% coupon.…”
  • Chip on Irwin Vise-Grip GrooveLock Pliers Deal: “When I was younger,I would buy cheap pliers and wear them out. Then I found Knipex, eBay used at…”
  • Stuart on I Can’t Decide on a New Miter Saw for a Future “Miter Saw Station”: “I've been dragging my feet over and over again. Will likely eventually setting on a 10" or 12" non-slider, maybe…”

Recent Posts

  • New Irwin Vise-Grip Pliers Wrenches are Now Available
  • Recommended EDC Knife, Multi-Tool, LED Flashlight Gear Combos for Under $200 (2019)
  • Fein Tools Math Riddle
  • Irwin Vise-Grip GrooveLock Pliers Deal
  • Adding Sides to Modular Tool Cabinets - Journey to an Organized Workshop Part 2
  • New Dewalt Cordless Miter Saws in 2019? (Reader Question)
  • Reader Question and Humorous Goof: Who Controls Product Descriptions?
  • New Ryobi 18V Flex-Shaft Rotary Tool
ToolGuyd New Tool Reviews Image

New Tool Reviews

Buying Guides

  • Best Cordless Drills
  • Best Cordless Impact Drivers
  • Best Cordless Multi-Tools
  • Cordless Power Tool Brands
  • Modular Tool Storage Systems
  • Ultimate Tool Gift & Upgrade Guide
ToolGuyd Knife Reviews Image

Knife Reviews

ToolGuyd Multi-Tool Reviews Image

Multi-Tool Reviews

ToolGuyd LED Flashlight and Worklight Reviews Image

LED Light Reviews

  • Home
  • About
  • Contact
  • Stores
  • Videos
  • Gear
  • AMZN Deal Finder
  • Privacy Policy
  • Terms of Use
  • Disclosure