Hilti has launched a new Nuron-powered cordless table saw.
Hilti says the new SCT 60-22 cordless table saw is for “cutting and ripping” tasks.
Here’s everything they shared with us:
Advertisement
- Cutting depth up to 90 mm or 3-1/2″, rip capacity up to 666 mm or 26-1/4″
- Faster set up speed and more jobsite mobility
- Easier to use and transport
- Up to 130 cuts per charge
If you’re considering professional cordless jobsite table saws, I feel that the Bosch 18V Profactor table saw is the best around right now.
This was all the information that Hilti provided us with. If you have any questions, maybe Hilti’s influencer partners, who attended an exclusive event and have reviews up on social media, can help.
Adam
Only spec I’m a little interested in, is if they are running a 10″ blade on this, or going with the usual battery sized 8-1/4″.
Doresoom
Seeing that it’s 3.5″ depth of cut, they’re at the minimum running a 10″ blade on it. DeWalt’s 10″ DWE7491RS table saw has a 3.125″ depth of cut.
Stuart
Its possible, but its not clear; safety guidelines require a minimum table size for 10” blades, which is why you’ll typically only find that size on larger saws attached to rolling stands, and this one looks too small for that.
Doresoom
I’d be very surprised if it’s an 8.25″ blade though. With a 5/8″ arbor that leaves just 0.3125″ between the arbor and table top surface. There would be almost zero space for an arbor washer and bearings.
Jody
What’s their game plan with this? Hilti customers and paid influencers dont share a large section in my venn diagram.
In general ignore everything a paid influencer says. They gave incentive to be kind, for more money and tools.
SamR
Are you new here?
Alexk
I’m assuming that Hilti is continuing to build high quality tools. I’m curious to see the tools in person and if they are better built than other pro tools for carpenters.