I decided to buy tool cabinets for a corner of my workshop, with the largest being a Rousseau Metal 8-drawer cabinet measuring 36″ wide x 24″ deep x 60″ tall.
From various specs sheets, it seems the weight should be around 600 pounds.
How would you unload this from a pallet and move it into place?
Advertisement
I still have the Pittsburgh 2-ton shop crane that Harbor Freight supplies for review – see New Harbor Freight Pittsburgh 2-Ton Shop Crane – Review.
HF says that the crane has a max height adjust of 75-3/16″ to 90-1/2″, which should be enough, although I might need to turn the cabinet sideways to fit it between the crane’s legs.
The cabinet will have a fork lift base. I don’t have a fork lift. A pallet jack, which I also don’t have, wouldn’t fit the 2-inch gap.
I’ve seen installation examples online where teams remove the drawers from a cabinet, tilt it over, and then install leveling feet.
Moving heavy equipment requires thinking things through. I’ll probably need to recruit an extra set of hands or two, but moving 600 pounds of cabinet will require careful planning regardless of how many people are involved.
How would you SAFELY and PROPERLY move this off a pallet? Once that’s done, moving it into place or for leveling feet assembly should be easy.
Advertisement
In lieu of a load balancer, maybe I can build an H-shaped structure for the bottom, with eye bolts at the 4 corners for lifting straps or chains. I would then just need 4 equal lengths each maybe 6-8 feet long.
I have moved heavy equipment before, but I don’t recall moving something like this, with such a large footprint and tall height.
Maybe I should just plan to remove the drawers and gently lower the frame onto a dolly, with moving blankets to protect the finish.
But, I’m wondering if there’s a more elegant approach. I considered getting a portable gantry crane – not for this but for freight deliveries in general – but have no place to store it.
A fork lift is out of the question.
Thoughts?
MM
I’ve done this with furniture dollies. Place the dolly right next to the pallet, walk the cabinet onto them. Or lean it to the side slightly, place dollies under the high side, lean it the other way, put dollies under the second side. Now you can roll it around whereever.
That’s assuming you have to move the whole thing at once. You can probably just take out the drawers and move it piecewise.
JoelLikestools
That was my first thout too. I would remove some drawers and then duck walk or tilt it onto a furniture dolly and the use a ratchet strap to keep it on there. That is how I have done other heavy pieces in the past. (Used the same idea to move furniture, heavy office cabinetry, and restaurant equipment.)
William
I thought the same thing. Furniture dolly, remove shelves… walk it!
Bonnie
A good appliance dolly can handle that weight, but I’d want multiple people involved spotting and definitely use a high end one.
The engine hoist/shop crane would be a good choice. That’s what I’ve used in the past for cast iron shop tools like my jointer (“only” about 450lbs). Though the maximum height often doesn’t take into account any necessary space for straps/chains above the object.
Why wouldn’t a pallet jack work? That’s what we used to move gigantic Lista cabinets at the machine shop I worked in for awhile. There are low-protile models that will fit under 2″ and I expect you can probably find somewhere to rent one (though I am spoiled with an excellent local equipment rental place).
Aram
I’d get a johnson bar involved.
ross
Is the ceiling finished? If the framing is exposed I’ve used a come-a-long to lift heavy things. Now I have an electric host that rolls along unistrut on the finished ceiling to unload from my pickup. I wouldn’t trust it with a ton of weight but take it the drawers and I think it would be fine.
Phranq
Walk it to edge of pallet onto PVC pipes and roll it into place. Typically easier with a helper. Golf Balls work also, if it has a flat bottom.
Woods Powr-Grip sucker cups are awesome for these situations, allowing you a good handhold for any maneuvering. Or these days the Grabo products if you have those. Come-alongs, if you have an anchor point. Viking arm tools are also great.
Plain+Grainy
My brother likes the rolling logs technique. Uses it out doors to move heavy objects without tearing up his lawn. As logs emerge from the back, carry them to the front. The PVC Should be non- marring.
isosceles
You could try running a 15 foot lifting sling through each fork pocket in a “choker” formation. This will give you two open eyes at the top – close one shackle around the both of them to create a single lifting point (think of each eye in the “U” bow of a classic Crosby anchor shackle). Then hook into that shackle with the hook from the Pittsburgh crane.
It’s not perfect but it would only take a minute to try out. And if you can tell it isn’t lifting the cabinet in a stable/solid way, I think it’ll give you a good sense of what you need to adjust.
Josh
I’ve used a Milwaukee packout dolly to move a 800lbs water heater. That’s how I’d do it
zchris87v
I had to do this with my Garant cabinets. The ace crew unloading them tried to roll their pallet jack through a muddy grass yard. They just left them in front of my garage on pallets. They were in cardboard boxes, so I slid them off the pallets and slowly but surely got them into the garage by myself, before wiggling them off the cardboard bases and into place.
MC703
As much as I love DIYing and having an excuse to buy a tool or equipment for a one-off task, I now just pay a pro to move heavy or oversized things. Learned my lesson the hard way trying to move an antique, 10×8 ft Korean oak china (not the country) cabinet up a flight of stairs.
Yadda
buy one of those thick plastic pieces used for sliding heavy furniture, then use a come-a-long to pull it into place. Another option is many many pieces of cast iron pipe. A final option is to use skatewheel conveyor. Turn it upside down so the wheels are on the ground then put your tool box on top and roll it to where you want it. A short six or 4 foot piece of skate wheel is preferred. This option might be iffy considering the weight.
Andy
Taking the drawers out is the easiest way to make the weight far more manageable.
From there, either use a hand truck, dolly, or the Hf hoist (listed in order of my preference) to move the cabinet carcass off the pallet.
Strap the carcass down securely to whatever you use to move it.
Then get into place, level it, check for square / plumb, and install the drawers.
Alex Peel
I have actually bought two of these cabinets recently and moved them myself. You just need to take out the drawers and then move the case. You can move the case with one person with a regular dolly, or just slide it if the floor is smooth. Then put the drawers back in. Depending on how its setup, if its a “only one drawer open at a time” style cabinet you will need to flip the retainer bar at the back of the cabinet everytime you put a new drawer in. You can do this easily with your hand.
Tony
Here’s an idea using furniture moving pads from home center or office supply store. Remove all drawers. Assuming the pallet is about 6″ tall, screw two 2x4x30″ together. Make two of these. Set one pair of 2x4s against the pallet and the second pair about 50″ away from the pallet. Put cardboard/moving blanket/old towels over 2x4s. Get a helper and tilt the cabinet onto the 2x4s.
Remove pallet and stand the cabinet up. Helper will be ready to catch it as it passes the balancing point. Tilt cabinet to insert slippery plastic furniture moving pads under each corner. Now you can push the cabinet around to its home. Remove the moving pads and walk it into the corner.
Al-another-Al
We paid an extra 800 bucks for white glove delivery. They had an electric pallet jack. I went to the bathroom. Came back, and it was upside down on a pile of moving blankets. Went to lunch. Came back and it was upright, leveled, and they were waiting for me to sign off on the delivery.
So, basically, get a Coke and a burger. It practically installs itself.
Mark M.
Don’t over think it. Two extra guys, a good dolly, take it slow. I moved a gun safe off a pallet that was bigger and heavier than that and it wasn’t bad at all. A piece of carpet works great if the bottom is smooth and the dolly can’t get in a corner or something. Have also used pipes, tennis balls, and plastic sliders. But if you can remove some drawers you’ll be golden.