The Triple-Lock Socket is a prototype all-in-one socket that can be used to remove a variety of fastener sizes, as well as those with rusted or damaged heads. There are actually two jaw profiles, one with serrated teeth (as shown) meant for removing damaged fasteners, and one with smooth faces meant to be used in “universal” one-size-fits-all applications.
How to use a Triple-Lock socket to remove a damaged fastener:
Advertisement
- Place the socket around a fastener
- Turn the rear adjustment clockwise to fit the jaws around the fastener
- Slide the locking ring forward to fix the socket jaws in place
- Use a 3/8″ drive ratchet to remove the fastener
- Unlock the jaws and you’re done
If you’re interested in purchasing a Triple-Lock socket once they hit the market, let them know. Expressing interest does not obligate you to purchase one when/should they reach production, but it does result in a 20% discount as a thank you for your early support.
GearHead
So far haven’t had a problem with my Industro sockets. They remove hex head bolts up to 30% rounded off. Which means they prevent rounding in the first place. Only had one round off, because I was pushing some SERIOUS torque on the bolt and scraped off a lot of the metal off the corners.
uthscsaedu
Did I miss the price somewhere?
That affects whether or not I would be interested.
How does it compare, price-wise, to something like gator-grip?
uthscsaedu
Let me rephrase that. I’m definitely interested, but the price is important to me.
Stuart
GearHead, you’re right, something like this will never replace conventional sockets, nor do I think it’s intended to.
Uthscsaedu, the socket is still in pre-production stages as the inventor seeks out USA manufacturing partners. If I recall correctly, they’re aiming for a ~$30 retail price.
JeffD
$30 is a decent price, especially considering it can remove many different sized fastener heads. All it takes is one engine bolt and it has paid for itself.
jesse
Any word on how this project is moving along, if at all?
Stuart
I sent the inventor an email a couple of months ago, and he said that they’re aiming for a June 2012 release. So I guess they’re moving forward, albeit slowly.